<13 mhz crystal oscillators

Wenzel Associates

COMPATIBLE SERIES - 4 to 24 MHz Crystal Oscillators

The Compatible series provides low phase noise in two standard Euro packages. Available with temperature stability from +-3x10-7 to +-3x10-10 over range, these oscillators offer instrument designers a common footprint for various customer requirements. SC-cut crystals offer excellent "close-in" phase noise, good short term phase stability (low pops) and fast warm-up. AT-cut crystals provide good overall stability at a low cost.

compatible.gif (3045 bytes)

Dimensions

  • 2.01 x 1.62 x .98" (51 x 41 x 24.9)
  • 1.44 x 1.13 x .75" (37 x 29 x 19)
  • 2.01 x 1.62 x 1.22" (51 x 41 x 31)

 

AT-cut Crystal (.75" and .98")

0 to +60C -20 to +70C Per Day
After 30 days		 5 MHz Phase Noise
10 Hz  100 Hz  1kHz  10 kHz		 10 MHz Phase Noise
10 Hz  100 Hz  1kHz  10 kHz
2x10-7 3x10-7 1x10-9 -115    -140     -150      -150 -105    -130     -150      -150
1x10-7 1x10-7 5x10-10 -120    -145     -150      -150 -110    -135     -150      -150

SC-cut Crystal (.75" and .98")

0 to +60C -20 to +70C Per Day
After 30 days		 5 MHz Phase Noise
10 Hz  100 Hz  1kHz  10 kHz		 10 MHz Phase Noise
10 Hz  100 Hz  1kHz  10 kHz
4x10-8 5x10-8 5x10-10 -125    -150     -150      -152 -115    -145     -150      -152
2x10-8 2x10-8 2x10-10 -130    -150     -150      -152 -120    -150     -150      -152
1x10-8   1x10-10 -135    -150     -150      -152 -125    -150     -150      -152
        -130    -150     -152      -152

SC-cut Crystal (1.22")

0 to +60C -20 to +70C Per Day
After 30 days		 5 MHz Phase Noise
10 Hz  100 Hz  1kHz  10 kHz		 10 MHz Phase Noise
10 Hz  100 Hz  1kHz  10 kHz
4x10-9 1x10-8 5x10-10 -125    -150     -150      -152 -115    -145     -150      -152
2x10-9 4x10-9 2x10-10 -130    -150     -150      -152 -120    -150     -150      -152
1x10-9 2x10-9 1x10-10 -135    -150     -150      -152 -125    -150     -150      -152
5x10-10 1x10-9     -130    -150     -152      -152
3x10-10 4x10-10      

 

Output Level 0 to +15 dBm Sine Wave into 50 ohms, CMOS, ECL, or TTL, please specify
Supply Voltage +10 to +28 VDC 5%,  5VDC please specify
Warm-Up Power <5 Watts for 5 minutes
Total Power <2.7 Watts at +25 C (+15 VDC)
Connectors Solder Pins

 

Compatible Standard Models
501-07183 Standard 10 MHz-SC
501-07240 Standard 10 MHz-AT
501-07241 Premium 10 MHz-AT
[navigate.html]